威尼斯人官网

新闻中心

您的位置: 首页 - 公司动态 - 常见问题 Summarize the solution to the problem of continuous welding and tin deposit in automatic soldering machineYour position: 威尼斯人官网 - Company News - Common Problems

Summarize the solutions to the problems of continuous welding and tin accumulation in automatic soldering machines

Release time: 2015.01.23 News source: Soldering machine | Automatic soldering machine | Soldering robot | Automatic soldering machine manufacturer | Automatic soldering machine soldering iron head | Soldering machine soldering iron head manufacturer |

If the automatic soldering machine is not used during use, the following situations will occur:

自动焊锡机 在焊锡过程中出现的连焊问题:连焊一般是指在焊锡过程中紧邻的几个两个焊点粘在一起的现象。 1. Continuous soldering problems in the soldering process of automatic soldering machines : Continuous soldering generally refers to the phenomenon that two adjacent soldering points are stuck together during the soldering process. The cause of this phenomenon is either caused by too much tin sending or the gap between the two points is too small. In this case, you should first reduce the amount of tin, and then check whether the position of the soldering iron head is correct. If it is not correct, you should adjust it in time.  

自动焊锡机 在焊锡过程中出现的堆锡问题:堆锡一般是指焊点焊成一个球形,管脚腿没有漏出来。 2. The problem of tin stacking during the soldering process of the automatic soldering machine : Tin stacking generally refers to the welding of a solder joint into a spherical shape, and the pin legs have not leaked out. The main reason for this phenomenon is due to the large amount of tin sent. At this time, it can be solved by reducing the amount of tin sent. Another reason is that the pin legs are too short and the pads are not exposed. .  
、虚焊问题:虚焊一般是指在焊接过程中看上去焊点还可以,实际上焊接时不捞的或是透锡量不够。 3. Welding problem: Welding generally refers to the fact that the solder joints appear to be okay during the welding process. In fact, the welding does not catch or the amount of tin penetration is insufficient. The main cause of this situation is the insufficient residence time of the soldering iron tip on the pad or the temperature is too low. Therefore, we only need to extend the dwell time of the soldering iron tip or increase the temperature.  

But these problems are not big problems, and they can be avoided by using them in the correct way. At the same time, automatic soldering machines can have such great charm in the electronics industry because of its wide application fields. 半导体产品、光学产品、电子产品、一般性家电产品、精密机器、 电器产品、大型机械产品、一般性消费品等。 Automatic soldering machine can solder semiconductor products, optical products, electronic products, general household appliances, precision machines, electrical products, large mechanical products, general consumer products, etc.

This article is divided into 1 pages
share to:
Previous: Outline application functions of automatic soldering machine
Next: Automatic soldering machine with low energy consumption and cost

related information