威尼斯人官网

新闻中心

您的位置: 首页 - 公司动态 - 常见问题 Reasons why the automatic soldering machine does not respond when you start it Your location: 威尼斯人官网 - Company News - Common Problems

Reasons why the automatic soldering machine does not respond when it is turned on

Release time: 2015.07.18 News source: Soldering machine | Automatic soldering machine | Soldering robot | Automatic soldering machine manufacturer | Automatic soldering machine soldering iron head |

What is the reason why the automatic soldering machine does not respond when it is turned on? If such a problem occurs, check whether the power cord is loose, and if so, plug it in again. At the same time check whether the emergency button is pressed. If it is already pressed, it should be released. It is also important to check whether the wires are broken, because broken wires are prone to accidents, and it is necessary to replace them with new ones. Of course, the replacement of electric wires should be repaired by the manufacturer or its maintenance service agent or similar qualified technical personnel to avoid injury or equipment damage. In use

In the case of an automatic soldering machine , the soldering machine may occasionally have large and small solder joints. There are two reasons for this. The first is that the soldering iron head is not suitable, as long as the appropriate soldering iron head is replaced; the second is that the tin feeding position is out of position. At this time, the problem can be solved by readjusting the position.

This article is divided into 1 pages
share to:
Previous: Maintenance of automatic soldering machine
Next: How to ensure smooth soldering in the use of automatic soldering machines

related information