How to maintain the iron head of the automatic soldering machine on a daily basis ? The Luo iron head is an important part of the automatic soldering machine , but also a fragile part, which is a consumable. Therefore, maintaining the soldering iron head can not only make the production line smooth, but also save costs.
1. Select an appropriate temperature. Excessively high temperature will weaken the function of the soldering iron tip , accelerate its oxidation, and shorten the service life relatively. 260 °左右），用锡覆在烙铁头上，以便去除包在上面的氧化物。 It is recommended that the temperature should not be too high ( about 260 °) during the first heating, and cover the soldering iron with tin to remove the oxides that are wrapped on it.
2. When using the soldering iron head for the first time, be sure to warm the soldering iron head first. 220 度，让烙铁头的上锡部位充分吃锡，目的是在烙铁头上出锡层形成一层全面保护膜，防止其在高温状态下被氧化，导致热传输失效。 The degree is adjusted to 220 degrees, so that the upper tin portion of the soldering iron head can fully eat tin. The purpose is to form a comprehensive protective film on the tin layer on the soldering iron head to prevent it from being oxidized at high temperatures, which will cause heat transfer failure.
3. The automatic soldering machine wipes the soldering iron head with sponge before welding. If the tinned part of the soldering iron tip contains black oxide, a new tin layer can be plated, and then wipe the soldering iron tip with a moist cleaning sponge. This cleaning is repeated until the oxide is completely removed, and then a new tin layer is applied. And regularly clean the tip of the soldering iron.
用之前，还是将烙铁头在清洁海绵上擦拭干净，然后上一层新锡，不可加任何化合物于沾锡面。 4. If not in use, turn off the power, wipe the soldering iron head on the cleaning sponge, and then apply a new layer of tin. Before using it again , wipe the soldering iron head on the cleaning sponge, and then apply a new layer. Tin, do not add any compounds to the tin surface.