威尼斯人官网

新闻中心

您的位置: 首页 - 公司动态 - 行业新闻 Iron Tip Daily MaintenanceYour position: 威尼斯人官网 - Company News - Industry News

Routine Maintenance

Release time: 2017.10.30 News source: Soldering machine | Automatic soldering machine | Soldering robot | Automatic locking screw machine | Automatic soldering machine soldering iron head | Soldering machine soldering iron head manufacturer | China's leading brand of automatic soldering machine Views:



The welding robot is equipped with various types of soldering iron heads, uses oxygen-free copper as the base material, and is plated with a special process. It has the characteristics of high performance such as rapid temperature recovery and long life. Usually under lead-free soldering, the service life of the tip is about 70,000 to 80,000 solder joints (the actual service life depends on the characteristics of the solder joints of the product). However, if it is used for more than 400 ° C for a long time, the service life of the soldering iron tip will be shortened due to increased corrosion and oxidation of the coating. Automatic soldering machine


1. The height of the soldering tip of the soldering iron tip exceeds the range of tin plating: chloride residues in the flux cause the failure to occur, and the soldering iron tip must be replaced with a new one.

2. Residual oxide on the tip of the soldering iron: Properly increase the number of times to clean the soldering iron tip; The soldering iron tip is severely perforated due to corrosion: the soldering iron tip is corroded by chloride, you must replace the soldering iron tip with a new one.

3. Soldering iron tip does not flow smoothly: completely remove the solder pre-soldered from the soldering iron tip, cool to room temperature to remove the oxide with sandpaper, and then restart the heating. During the heating process, pre-soldering on the surface of the soldering iron tip.

Fourth, periodic maintenance: check once a month whether the tin cutting blade is damaged; whether there is water accumulation in the water bottle of the voltage regulator filter valve; whether the moving shafts are loose; whether the pins of the cable connectors are loose and falling off
  Automation manufacturer 18033477135 
This article is divided into 1 pages
share to:
Previous: Installation and routine maintenance of automatic dispensers!
Next: No more

related information