1. Missing lock, floating lock, sliding tooth detection.
2. Double-station alternate work; greatly improve work efficiency.
3. The screws are arranged automatically and sucked synchronously.
4. The vacuum detection function guarantees that the screws can be sucked each time before the lock is paid.
5.Work on high and low planes
6. Working status signal indication.
7. Resolution: 0.01mm
8, file storage capacity: can store 999 files, more than 1,000 single files
9. Control method: motion control card.
1. Screws that can lock products of different heights.
2. Vacuum detection function: The vacuum pressure detection switch accurately displays the suction pressure value of each screw. When the pressure value is not reached, the screw will be sucked again to ensure that it is dropped in the middle to avoid missing screws.
3. The simple servo system (stepper motor with signal feedback function) is used to ensure that the signal is synchronously fed back at high speed to avoid not losing steps.
4. X, Y, Z adopt double silver guide rails, and the bottom structure is firm and stable.
5. The pillars on both sides are made of die-cast aluminum, and the unique aluminum through-holes make it convenient and beautiful to replace the wire without removing the shell.
6. This product can quickly remove the screw failure. When the fault is removed, it can continue to operate directly at the original error point.
7. System with screw sliding tooth and floating lock detection function: When the screw is not working well (missing lock, sliding tooth, floating lock), the system will automatically pause and alarm.
8. Double-platform operation, double-station cycle operation, saving time and improving efficiency.
9, single-chip motion control, through handheld display programming, easy to operate, easy to understand.