1. Missing lock, floating lock, sliding tooth detection.
2. The vacuum detection function ensures that the screw can be sucked each time before the lock is paid.
3. Two different types of screws can be locked and locked during work.
4. The screws are automatically arranged and synchronized.
5. Working status signal indication.
6. Resolution: 0.01mm
7, file storage capacity: can store 999 files,
More than 1000 points in a single file
8. Control method: motion control card.
9. Input power: 220V
10. Programming mode: Hand-held teaching programmer.
1. Screws that can lock products of different heights.
2. Vacuum detection function: The vacuum pressure detection switch accurately displays the suction pressure value of each screw. When the pressure value is not reached, the screw will be sucked again to ensure that it is dropped in the middle to avoid missing screws.
3. Two different screws can be locked and paid at the same time.
4. The simple servo system (stepper motor with signal feedback function) is used to ensure that the signal is synchronized during high-speed operation to avoid not losing steps.
5. X, Y, and Z adopt double silver guide rails, and the bottom structure is firm and stable.
6. The pillars on both sides are made of die-cast aluminum, and the unique aluminum through-holes make it convenient and beautiful to replace the wire without removing the shell.
7. This product can quickly remove the screw failure. When the fault is removed, it can continue to operate directly at the original error point.
8. System with screw sliding tooth and floating lock detection function: When the screw is not working properly (missing lock, sliding tooth, floating lock), the system will automatically pause and alarm.
9. Double-platform operation, double-station cycle operation, saving time and improving efficiency.
10, single-chip motion control, through handheld display programming, easy to operate, easy to understand.
1. Photoelectric control: Japan Panasonic, Japan Omron, Taiwan Yadeke.
2.The guide rail adopts Taiwan Shangyin double slide rail
3. Transmission method: using Shinano stepper motor or simple servo (stepper motor with signal feedback to ensure repeat accuracy)
4. Control method: handheld teaching box + single-chip control motion system
5. Body: heavier than aluminum structure, stable chassis, can be customized at any time to suit the size of the customer's product
6. Power supply: Taiwan Mingwei switching power supply
7, electric approval: Qi Lisu, good helpers, HIOS and other brands.
8. Screw feeder: independent brands, Japanese HIOS, cache and other brands
9. The belt adopts foreign steel wire belt: Features are wear-resistant and stable.